top of page
Antenna change
New antenna standing up 25ft. A home-build dual band J-pole was replaced by the CX-333.
The CX-333
close up photo while it was mounted on the mast. The chair was a good helper, although it was very unstable. A better support was not available at this time.
The Heart of AllStarLink
Raspberry Pi4 mounted on the wooden board. Powered vie CISCO Power Injector POE (Power Over Ethernet). Currently running on WIFI until router on all internet connections are mounted at the back of it. Soon to be connected via Ethernet cable.
The RPI4 is in a metal enclosure which also acts as its cooler. Passive cooling was my goal. Here is a link in case you are curious about the enclosure https://www.amazon.ca/gp/product/B0B62WBF9N/ref=ppx_yo_dt_b_asin_title_o06_s00?ie=UTF8&psc=1
POE Power adapter https://www.amazon.ca/gp/product/B0831M4ST9/ref=ppx_yo_dt_b_asin_title_o06_s00?ie=UTF8&psc=1
The RPI4 is in a metal enclosure which also acts as its cooler. Passive cooling was my goal. Here is a link in case you are curious about the enclosure https://www.amazon.ca/gp/product/B0B62WBF9N/ref=ppx_yo_dt_b_asin_title_o06_s00?ie=UTF8&psc=1
POE Power adapter https://www.amazon.ca/gp/product/B0831M4ST9/ref=ppx_yo_dt_b_asin_title_o06_s00?ie=UTF8&psc=1
Check back often as photos will be added
bottom of page